Products / Services

HOME > Products / Services > Steel Drums > About drums

Steel Drums

Drum Recycling Process

About Drums

Closed head Drum

This is the most common type of closed head can with both the top and bottom plates curled to a leak-tight seam.
It is widely used for lubricants, chemicals, foods, etc.

Overlapping curls Drum

Because the coil fastener (the part which connects the top to the body) is a spiral shape, it is highly resistant against external impacts. Also, its high position means that even if the drum falls and is dented, no leaks will occur. Increasing the strength of the coil fastener has allowed us to lighten the drum by reducing the thickness of the body.

Stainless Steel Drums

Unlike ordinary steel drums, stainless steel drums have welded ends, therefore they are stronger against dropping and impacts.Because of the good corrosion and chemical resistance, stainless steel drums are used to store and ship chemicals, medicines, aromatics, food, etc.
This high-end product also delivers good cost-performance.

Remodeled Open Head Drum

If residue cannot be removed from closed head drum cans, the top is detached and the can is cleaned. It is then remodeled as an open can, which is highly evaluated for the resource recycling.

Open head Drum

With a detachable lid, our open head cans are used primarily for holding viscous liquids such as paint and adhesive, as well as solids and powders.
締輪(バンド)

SOP Drums (Rounded bottom)

Designed for repeated use with viscous substances such as paint, varnish, adhesive, etc.Unlike general steel drums, the bottom corner is rounded to ensure all residue is removed.To increase strength, a 9 mm core is inserted inside the curl on the top of the drum and the bottom is reinforced with a 2.3 mm skirt.
SOP drums can be reused ten or more times. They are highly rated by users as very economical drums.This high-end product also delivers good cost-performance.

MC Chemi Drum

A polyethylene liner (bag) is fit inside semi-finished open head drum cans and bodies, and a new lid is attached to produce a low priced, closed head chemical drum can.

Go to top